During the production, injection molding and molding process control of ABS engineering plastics products, a series of phenomena such as cracks, blisters and shrinkage occur due to excessive moisture in the material; In view of this situation, a kind of instrument with drying method structure for rapid moisture determination is provided. Csy-l5a halogen fast moisture meter and ABS engineering plastic moisture meter adopt electromagnetic force balance sensor weighing system to ensure accurate weighing; Ring quartz tungsten halogen infrared plus heat source, quickly dry samples; During the drying process, csy-l5a halogen rapid moisture tester and ABS engineering plastic moisture tester continue to measure and immediately display the lost moisture content% of the sample. After the drying process is completed, the final measured moisture content value is locked and displayed. Compared with the international oven heating method, the annular quartz tungsten halogen infrared heating method can uniformly and quickly dry the sample at high temperature, and the sample surface is not easy to be damaged. Its detection results are in good consistency with the national standard oven method, which is replaceable, and the detection efficiency is much higher than the oven method. Intelligent operation. Generally, the determination of samples can be completed in a few minutes. It is a new type of rapid detection instrument.

ABS engineering plastics moisture tester / moisture detector can be widely used to quickly determine the moisture content in PP plastic, PE plastic, PVC plastic, PS plastic, PA plastic, PC plastic, pet plastic, PPS plastic, plastic additives, plastic materials, polystyrene acrylonitrile, polyamide, polypropylene, polycarbonate, plastic particles, plastic particles, plastic particles, plastic particles.

Technical parameters of ABS engineering plastics moisture tester:

1. Moisture measurement scale: 0.01-100%

2. Readability of moisture content: 0.01%

3. Weighing scale: 0-100g

-

4. Sensor accuracy: 0.001g

5. Weighing sensor: the electromagnetic force balance sensor ensures accurate weighing

6. Heating temperature scale: start -205 ℃

7. Heating source: tungsten halogen ring lamp

8. Display parameters:% moisture, time, temperature, weight

9. Communication interface: standard RS232 communication interface - convenient for connecting printers, computers and other peripheral devices, meeting the requirements of fda/haccp format

10. Power supply: 220V ± 10%/110v ± 10% (optional)

11. Frequency: 50Hz ± 1hz/60hz ± 1Hz (optional)

12. Scale size (mm) diameter 110

Source: Jiangmen engineering plastics http://www.feimandao.com/